業績

外部サイト

Scopus

Google Scholar

ORCiD

researchmap  

J-GLOBAL

Web of Science ResearcherID

科学研究費助成事業データベース

大阪公立大学 研究者情報

  

Original Papers

  1.  Interactions between interstitial and substitutional elements of solute diatomic and triatomic clusters in α-Fe from first-principles calculations
    T. Uesugi, S. Ashino, Y. Takigawa and K. Higashi
    ISIJ International, Vol. 64, pp. 1206-1217 (2024).
    https://doi.org/10.2355/isijinternational.ISIJINT-2024-062
  2. 深層学習による回帰と不良品分類を両立するダクタイル鋳鉄管の鋳肌検査
    上杉徳照, 大倉直也, 中島智晴, 小川耕平, 堤親平, 澤田健二, 中本光二
    材料, Vol. 73, pp. 157-164 (2024).
    https://doi.org/10.2472/jsms.73.157
  3. 材料の種類を考慮した転移学習による破面分類
    上杉徳照, 近藤充晟, 濱田真行, 喜多俊輔, 平田智丈
    材料, Vol. 72, pp. 376-383 (2023).
    https://doi.org/10.2472/jsms.72.376
  4. Sublattice alloy design of high-strength steels: Application of clustering and nanoscale precipitation of interstitial and substitutional solutes
    T. Furuhara, Y. Zhang, M. Sato, G. Miyamoto, M. Enoki, H. Ohtani, T. Uesugi and H. Numakura
    Scripta Materialia, Vol. 223, 115063 (2023).
    https://doi.org/10.1016/j.scriptamat.2022.115063
  5. 分位損失を用いた機械学習による黒鉛球状化処理におけるMg歩留まりの予測
    福島瑞貴, 上杉徳照, 辻川正人, 堤親平, 小川耕平, 澤田健二, 中本光二
    鋳造工学, 第94巻, pp. 69-75 (2022).
    https://doi.org/10.11279/jfes.94.69
  6. New dislocation dissociation accompanied by anti-phase shuffling in the α″ martensite phase of a Ti alloy
    M. Tahara, N. Otaki, D. Minami, T. Uesugi, Y. Takigawa, K. Higashi, T. Inamura and H. Hosoda
    Acta Materialia, Vol. 227, 117705 (2022).
    https://doi.org/10.1016/j.actamat.2022.117705
  7. Solute cluster-induced precipitation and resultant surface hardening during nitriding of Fe–Al–V alloys
    G. Miyamoto, Y. Tateyama, T. Uesugi, Y. Hayasaka and T. Furuhara
    Scripta Materialia, Vol. 203, 114121 (2021).
    https://doi.org/10.1016/j.scriptamat.2021.114121
  8. 港湾鋼構造物の腐食を防止するAl-Mg-Ca溶射皮膜の開発
    上杉徳照, 東健司
    防錆管理, Vol. 65, pp. 91-97 (2021).
    https://ci.nii.ac.jp/naid/40022505675
  9. Prediction System for Solid Solubility Limits of Ag-, Cu-, Al-, and Mg-Based Alloys Using Artificial Neural Networks and First-Principles Calculations
    T. Mochizuki, T. Uesugi and Y. Takigawa
    Materials Transactions, Vol. 61, pp. 2083-2090 (2020).
    https://doi.org/10.2320/matertrans.MT-MBW2019010
  10. Al–7.3 mass%Mg合金の粒界破壊に及ぼす微量Fe添加の影響
    大手里奈, 山田貴洋, 上杉徳照, 瀧川順庸, 東健司
    軽金属, Vol. 69, pp. 457-464 (2019).
    https://doi.org/10.2464/jilm.69.457
  11. Mechanical properties and microstructures after abnormal grain growth in electrodeposited Ni–W alloys
    I. Matsui, A. Watanabe, T. Uesugi, N. Omura, Y. Takigawa, T. Yamamoto
    Materialia, Vol. 8, 100481 (2019).
    https://doi.org/10.1016/j.mtla.2019.100481
  12. Suppression of the thermal embrittlement induced by sulfur segregation to grain boundary in Ni-based electrodeposits
    I. Matsui, Y. Hisai, T. Uesugi, N. Omura, Y. Takigawa, K. Higashi
    Materialia, Vol. 6, 100312 (2019).
    https://doi.org/10.1016/j.mtla.2019.100312
  13. Al-Cu-Mg合金とAl-Zn-Mg-Cu合金の粒界破壊に及ぼすZr添加の影響
    大手里奈, 吉岡浩司, 上杉徳照, 瀧川順庸, 東健司
    軽金属, Vol. 69, pp. 235-241 (2019).
    https://doi.org/10.2464/jilm.69.235
  14. Artificial neural network assisted by first-principles calculations for predicting transformation temperatures in shape memory alloys
    D. Minami, T. Uesugi, Y. Takigawa, K. Higashi
    International Journal of Modern Physics B, Vol. 33, 1950055 (2019).
    https://doi.org/10.1142/s0217979219500553
  15. Al-8Mg alloy with high strength and high ductility by addition of a grain boundary strengthening element
    M. Ninomiya, R. Ohte, T. Uesugi, Y. Takigawa, K. Higashi
    Materials Letter, Vol. 245, pp. 218-221 (2019).
    https://doi.org/10.1016/j.matlet.2019.03.015
  16. Ductile electrodeposited Al from a dimethylsulfone bath with trace amounts of tin chloride
    C. Kuma, K. Sato, I. Matsui, Y. Takigawa, T. Uesugi, K. Higashi
    Materials Letters, Vol. 244, pp. 192-194 (2019).
    https://doi.org/10.1016/j.matlet.2019.02.074
  17. Reduction of impurity contents in aluminum plates electrodeposited from a dimethylsulfone-aluminum chloride bath
    C. Kuma, K. Sato, Y. Hanaoka, I. Matsui, Y. Takigawa, T. Uesugi, K. Higashi
    Journal of Alloys and Compounds, Vol. 783, pp. 919-926 (2019).
    https://doi.org/10.1016/j.jallcom.2018.12.355
  18. Development of Electrodeposition Process Based on Chloride Electrolytes for Bulk Pure Fe with Plastic Deformability
    Y. Ogura, M. Kanetake, I. Matsui, Y. Takigawa, T. Uesugi, K. Higashi
    Materials Transactions, Vol. 60, pp. 130-135 (2019).
    https://doi.org/10.2320/matertrans.M2018214
  19. 高延性を有する電析バルクナノ結晶Ni-W合金におけるW含有量の増加
    児玉勇人, 森宏樹, 松井功, 瀧川順庸, 上杉徳照, 東健司
    表面技術, Vol. 70, pp. 50-52 (2019).
    https://doi.org/10.4139/sfj.70.50
  20. Revealing the intrinsic ductility of electrodeposited nanocrystalline metals
    H. Mori, I. Matsui, Y. Takigawa, T. Uesugi, K. Higashi
    Materials Letters, Vol. 235, pp. 224-227 (2019).
    https://doi.org/10.1016/j.matlet.2018.10.053
  21. FeCrSi繊維強化Al合金基複合材料の高温変形構成式の構築
    府山伸行, 青木良晃, 上杉徳照, 瀧川順庸, 東 健司
    材料, Vol. 67, pp. 1000-1005 (2018).
    https://doi.org/10.2472/jsms.67.1005
  22. Fabrication of Defect-Free Fe-Mn Alloys by Using Electrodeposition
    Y. Ogura, H. Mori, Y. Takigawa, T. Uesugi and K. Higashi
    Materials Transactions, Vol. 59, pp. 935-938 (2018).
    https://doi.org/10.2320/matertrans.M2018010
  23. Fabrication of Electrodeposited Permalloys with High Strength and High Ductility
    M. Kanetake, Y. Takigawa, T. Uesugi and K. Higashi
    Materials Transactions, Vol. 59, pp. 598-601 (2018).
    https://doi.org/10.2320/matertrans.MBW201707
  24. First-principles study of transformation strains and phase stabilities in α″ and β Ti-Nb-X alloys
    D. Minami, T. Uesugi, Y. Takigawa and K. Higashi
    Journal of Alloys and Compounds, Vol. 716, pp. 37–45 (2017).
    https://doi.org/10.1016/j.jallcom.2017.05.046
  25. 複合サイクル腐食試験によるAl-5Mg-0.15Ca溶射皮膜の評価
    足立振一郎, 上杉徳照, 井上博之, 東健司
    溶射, Vol. 54, pp. 55-57 (2017).
    https://doi.org/10.11330/jtss.54.55
  26. Improvement of High Temperature Strength by Addition of Vanadium Content of Ni–Cr–Mo Steel for Brake Discs
    N. Harada, T. Uesugi, Y. Takigawa and K. Higashi
    ISIJ International, Vol. 57, pp. 550-557 (2017).
    https://doi.org/10.2355/isijinternational.ISIJINT-2016-452
  27. Al-5Mg合金溶射皮膜における添加元素が引張密着強度に及ぼす影響
    足立振一郎, 井上博之, 上杉徳照, 東健司, 植野修一
    溶射, Vol. 53, pp. 103-105 (2016).
    https://doi.org/10.11330/jtss.53.103
  28. Effect of Alloying Element X on Transformation Strains and Phase Stabilities between αʹʹ and β Ti-Nb-X (X = Al, Sn, Zr, Ta) Ternary Alloys from First -Principles Calculations
    D. Minami, T. Uesugi, Y. Takigawa and K. Higashi
    Materials Transactions, Vol. 57, pp. 263-268 (2016).
    https://doi.org/10.2320/matertrans.MB201509
  29. Calculation of alloying effect on formation enthalpy of TiCu intermetallics from first-principles calculations for designing Ti–Cu-system metallic glasses
    N. Shirasawa, Y. Takigawa, T. Uesugi and K. Higashi
    Philosophical Magazine Letters, Vol. 96, pp. 27-34 (2016).
    https://doi.org/10.1080/09500839.2015.1134833
  30. Effects of Solute Fe, Zn and Mg on Recrystallization in Aluminum
    K. Wada, K. Takeshima, T. Uesugi, Y. Takigawa and K. Higashi
    Materials Transactions, Vol. 57, pp. 329-334 (2016).
    https://doi.org/10.2320/matertrans.MBW201515
  31. Reduction in sulfur content of electrodeposited bulk nanocrystalline Fe–Ni alloys using manganese chloride
    H. Mori, I. Matsui, Y. Takigawa, T. Uesugi and K. Higashi
    Materials Letters, Vol. 175, pp. 86-88 (2016).
    https://doi.org/10.1016/j.matlet.2016.03.146
  32. Effect of Solute Elements on Grain Refinement during Friction Stir Processing in High-Purity Aluminum
    T. Uesugi, H. Iwami, Y. Takigawa, K. Higashi
    Materials Science Forum Vols. 838-839, pp. 116-121 (2016).
    https://doi.org/10.4028/www.scientific.net/MSF.838-839.116
  33. Texture Change during Superplastic Deformation in Fine-Grained Magnesium Alloys
    H. Watanabe, T. Uesugi, Y. Takigawa, K. Higashi
    Materials Science Forum Vols. 838-839, pp. 59-65 (2016).
    https://doi.org/10.4028/www.scientific.net/MSF.838-839.59
  34. Mg-6%Al-1%Zn-2%Ca合金のMIG溶接
    瀧川順庸, 味原颯大, 松下遼, 上田光二, 木ノ本裕, 上杉徳照, 東健司
    軽金属, Vol. 66, pp. 252-257 (2016).
    https://doi.org/10.2464/jilm.66.252
  35. Achieving room-temperature superplasticity in an ultrafine-grained Zn-22% Al alloy
    T. Uesugi, Y. Takigawa, M. Kawasaki, K. Higashi
    Letters on Materials, Vol. 5, pp. 269-275 (2015).
  36. The evaluation parameters for glass-forming ability in Ti–Cu system metallic glasses
    N. Shirasawa, Y. Takigawa, T. Uesugi and K. Higashi
    Materials Letters, Vol. 139, pp. 73-76 (2015).
    https://doi.org/10.1016/j.matlet.2014.10.027
  37. Mechanical Behavior of Electrodeposited Bulk Nanocrystalline Fe-Ni Alloys
    I. Matsui, H. Mori, T. Kawakatsu, Y. Takigawa, T. Uesugi, K. Higashi
    Materials Research, Vol. 18, pp. 95-100 (2015).
    https://doi.org/10.1590/1516-1439.329014
  38. Significance of Si impurities on exceptional room-temperature superplasticity in a high-purity Zn-22%Al alloy
    T. Uesugi, M. Kawasaki, M. Ninomiya, Y. Kamiya, Y. Takigawa, K. Higashi
    Materials Science and Engineering A, Vol. 645, pp. 47-56 (2015).
    https://doi.org/10.1016/j.msea.2015.07.087
  39. Development of highly efficient saving processes of rare earth in R-T-B permanent magnet
    A. Saguchi, T. Uesugi, Y. Takigawa and K. Higashi
    Physics Procedia, Vol. 54, pp. 168-173 (2014).
    https://doi.org/10.1016/j.phpro.2014.10.055
  40. Development of new high-strength and heat-resistant Mg-Zn-Y-X (X = Zr and Ag) casting alloys
    Y. Ienaga, K. Inoue, T. Uesugi, Y. Takigawa and K. Higashi
    Materials Science Forum, Vol. 783-786, pp. 384-389 (2014).
    https://doi.org/10.4028/www.scientific.net/MSF.783-786.384
  41. Preparatory electrodeposition process for high purity bulk aluminum
    Y. Hanaoka, S. Ono, I. Matsui, Y. Takigawa, T. Uesugi and K. Higashi
    Advanced Materials Research, Vol. 922, pp. 237-241 (2014).
    https://doi.org/10.4028/www.scientific.net/AMR.922.237
  42. Effect of small addition of Si on superplastic elongation at room temperature in Zn-Al eutectoid superplastic alloy
    Y. Kamiya, M. Ninomiya, T. Uesugi, Y. Takigawa and K. Higashi
    Advanced Materials Research, Vol. 922, pp. 328-331 (2014).
    https://doi.org/10.4028/www.scientific.net/AMR.922.328
  43. Relationship between strength and grain size of friction stir processed and annealed high purity aluminum
    S. Kobayashi, T. Kawakatsu, Y. Takigawa, T. Uesugi and K. Higashi
    Advanced Materials Research, Vol. 922, pp. 372-375 (2014).
    https://doi.org/10.4028/www.scientific.net/AMR.922.372
  44. Influence of impurities on mechanical properties of electrodeposited bulk nanocrystalline Al
    S. Ono, Y. Hanaoka, I. Matsui, Y. Takigawa, T. Uesugi and K. Higashi
    Advanced Materials Research, Vol. 922, pp. 574-579 (2014).
    https://doi.org/10.4028/www.scientific.net/AMR.922.574
  45. Influence of filler rod composition on the strength of tungsten inert gas welded magnesium alloy joint
    S. Shimomura, T. Minomo, Y. Takigawa, T. Uesugi, M. Ueda, Y. Kinomoto and K. Higashi
    Advanced Materials Research, Vol. 922, pp. 663-666 (2014).
    https://doi.org/10.4028/www.scientific.net/AMR.922.663
  46. Design and fabrication of new Ti-based ternary metallic glasses based on effective atomic radius in the Ti solid solution calculated by ab-initio calculation
    N. Shirasawa, R. Ito, Y. Takigawa, T. Uesugi and K. Higashi
    Advanced Materials Research, Vol. 922, pp. 671-675 (2014).
    https://doi.org/10.4028/www.scientific.net/AMR.922.671
  47. Dislocation creep in al-22.2, 53.6 and 101 at.ppm Fe solid solution alloys
    K. Takeshima, T. Uesugi, Y. Takigawa and K. Higashi
    Advanced Materials Research, Vol. 922, pp. 749-754 (2014).
    https://doi.org/10.4028/www.scientific.net/AMR.922.749
  48. Fabrication of bulk nanocrystalline Fe-Ni alloys with high strength and high ductility by an electrodeposition
    I. Matsui, T. Kawakatsu, Y. Takigawa, T. Uesugi and K. Higashi
    Materials Letters, Vol. 116, pp. 71-74 (2014).
    https://doi.org/10.1016/j.matlet.2013.10.108
  49. Contribution of interstitial solute strengthening in aluminum
    I. Matsui, S. Ono, Y. Hanaoka, T. Uesugi, Y. Takigawa and K. Higashi
    Philosophical Magazine Letters, Vol. 94, pp. 63-71 (2014).
    https://doi.org/10.1080/09500839.2013.860492
  50. Enhancement in mechanical properties of bulk nanocrystalline Fe-Ni alloys electrodeposited using propionic acid
    I. Matsui, H. Mori, T. Kawakatsu, Y. Takigawa, T. Uesugi and K. Higashi
    Materials Science and Engineering A, Vol. 607, pp. 505-510 (2014).
    https://doi.org/10.1016/j.msea.2014.04.042
  51. Prediction and fabrication of Ti–Zr–Co ternary metallic glasses based on effective atomic radius in Ti solid solution from first-principles calculations
    N. Shirasawa, R. Ito, Y. Takigawa, T. Uesugi and K. Higashi
    Journal of Non-Crystalline Solids, Vol. 400, pp. 67-71 (2014).
    https://doi.org/10.1016/j.jnoncrysol.2014.05.005
  52. Strategy for electrodeposition of highly ductile bulk nanocrystalline metals with a face-centered cubic structure
    I. Matsui, Y. Takigawa, D. Yokoe, T. Kato, T. Uesugi and K. Higashi
    Materials Transactions, Vol. 55, pp. 1859-1866 (2014).
    https://doi.org/10.2320/matertrans.M2014268
  53. Microstructure and Mechanical Properties of the Heat-Resistant Mg-Zn-Y-Ag Cast Alloys with Long-Period Stacking Ordered Structures
    Y. Ienaga, K. Inoue, T. Uesugi and K. Higashi
    Journal of the Japan Institute of Metals, Vol. 77, pp. 159-164 (2013).
    https://doi.org/10.2320/jinstmet.77.159
  54. Enthalpies of Solution in Ti-X (X = Mo, Nb, V and W) Alloys from First-Principles Calculations
    T. Uesugi, S. Miyamae and K. Higashi
    Materials Transactions, Vol. 54, pp. 484-492 (2013).
    https://doi.org/10.2320/matertrans.MC201209
  55. First-Principles Calculation of Grain Boundary Excess Volume and Free Volume in Nanocrystalline and Ultrafine-Grained Aluminum
    T. Uesugi and K. Higashi
    Materials Transactions, Vol. 54, pp. 1597-1604 (2013).
    https://doi.org/10.2320/matertrans.L-M2013816
  56. First-principles studies on lattice constants and local lattice distortions in solid solution aluminum alloys
    T. Uesugi and K. Higashi
    Computational Materials Science, Vol. 67, pp. 1-10 (2013).
    https://doi.org/10.1016/j.commatsci.2012.08.037
  57. Effect of interstitial carbon on the mechanical properties of electrodeposited bulk nanocrystalline Ni
    I. Matsui, T. Uesugi, Y. Takigawa and K. Higashi
    Acta Materialia, Vol. 61, pp. 3360-3369 (2013).
    https://doi.org/10.1016/j.actamat.2013.02.025
  58. Effect of Addition of Small Amount of Zinc on Microstructural Evolution and Thermal Shock Behavior in Low-Ag Sn-Ag-Cu Solder Joints during Thermal Cycling
    N. Hamada, T. Uesugi, Y. Takigawa and K. Higashi
    Materials Transactions, Vol. 54, pp. 796-805 (2013).
    https://doi.org/10.2320/matertrans.MBW201206
  59. Effect of additives on tensile properties of bulk nanocrystalline Ni-W alloys electrodeposited from a sulfamate bath
    I. Matsui, Y. Takigawa, T. Uesugi and K. Higashi
    Materials Letters, Vol. 99, pp. 65-67 (2013).
    https://doi.org/10.1016/j.matlet.2013.02.067
  60. Accommodation mechanisms for grain boundary sliding as inferred from texture evolution during superplastic deformation
    H. Watanabe, K. Kurimoto, T. Uesugi, Y. Takigawa and K. Higashi
    Philosophical Magazine, Vol. 93, pp. 2913-2931 (2013).
    https://doi.org/10.1080/14786435.2013.793460
  61. Effect of orientation on tensile ductility of electrodeposited bulk nanocrystalline Ni-W alloys
    I. Matsui, Y. Takigawa, T. Uesugi and K. Higashi
    Materials Science and Engineering A, Vol. 578, pp. 318-322 (2013).
    https://doi.org/10.1016/j.msea.2013.04.114
  62. Pre-electrodeposition process for improving tensile ductility of Al electrodeposited from a dimethylsulfone bath
    I. Matsui, Y. Hanaoka, S. Ono, Y. Takigawa, T. Uesugi and K. Higashi
    Materials Letters, Vol. 109, pp. 229-232 (2013).
    https://doi.org/10.1016/j.matlet.2013.07.103
  63. Casting Process and Mechanical Properties of Large-Scale Extruded Mg-Zn-Y Alloys
    Y. Ienaga, K. Inoue, T. Uesugi and K. Higashi
    SAE Technical Paper, 2013-01-0979 (2013).
    https://doi.org/10.4271/2013-01-0979
  64. 粒界過剰体積の第一原理計算と超微細粒・ナノ結晶アルミニウムの自由体積
    上杉徳照, 東健司
    軽金属, Vol. 62, pp. 464-471 (2012).
    https://doi.org/10.2464/jilm.62.464
  65. 第一原理計算によるチタン合金の合金設計
    上杉徳照,宮前将,東健司
    溶融塩および高温化学, Vol. 55, pp. 108-114 (2012).
    https://ci.nii.ac.jp/naid/40019493583
  66. Threshold stress for superplasticity in solid solution magnesium alloys
    H. Watanabe, A. Owashi, T. Uesugi, Y. Takigawa and K. Higashi
    Philosophical Magazine, Vol. 92, pp. 787-803 (2012).
    https://doi.org/10.1080/14786435.2011.634849
  67. Improvement in tensile ductility of electrodeposited bulk nanocrystalline Ni-W by sulfamate bath using propionic acid
    I. Matsui, Y. Takigawa, T. Uesugi and K. Higashi
    Microelectronic Engineering, Vol. 91, pp. 98-101 (2012).
    https://doi.org/10.1016/j.mee.2011.10.018
  68. Effects of Zn addition and aging treatment on tensile properties of Sn-Ag-Cu alloys
    N. Hamada, T. Uesugi, Y. Takigawa and K. Higashi
    Journal of Alloys and Compounds, Vol. 527, pp. 226–232 (2012).
    https://doi.org/10.1016/j.jallcom.2012.03.008
  69. Fabrication of bulk nanocrystalline Al electrodeposited from a dimethylsulfone bath
    I. Matsui, S. Ono, Y. Takigawa, T. Uesugi and K. Higashi
    Materials Science and Engineering A, Vol. 550, pp. 363-366 (2012).
    https://doi.org/10.1016/j.msea.2012.04.088
  70. Optimization of the Mg-Al-Zn-Ca-Sr alloy composition based on the parameter A’ in the constitutive equation for the climb-controlled dislocation creep including the stacking fault energy
    K. Hirai, I. Takeuchi, Y. Takigawa, T. Uesugi and K. Higashi
    Materials Science and Engineering A, Vol. 551, pp. 19-24 (2012).
    https://doi.org/10.1016/j.msea.2012.04.061
  71. Segregation of Alkali and Alkaline Earth Metals at Σ11(113)[110] Grain Boundary in Aluminum from First-Principles Calculations
    T. Uesugi and K. Higashi
    Materials Transactions, Vol. 53, pp. 1699-1705 (2012).
    https://doi.org/10.2320/matertrans.M2012108
  72. Isotropic superplastic flow in textured magnesium alloy
    H. Watanabe, K. Kurimoto, T. Uesugi, Y. Takigawa and K. Higashi
    Materials Science and Engineering A, Vol. 558, pp. 656-662 (2012).
    https://doi.org/10.1016/j.msea.2012.08.070
  73. Application of Electroforming Process to Bulk Amorphous Ni-W Alloy
    Y. Takigawa, S. Wakayama, I. Matsui, T. Uesugi and K. Higashi
    Materials Transactions, Vol. 52, pp. 37-40 (2011).
    https://doi.org/10.2320/matertrans.M2010288
  74. Grain Boundary Relaxation in Fine-grained Magnesium Solid Solutions
    H. Watanabe, A. Owashi, T. Uesugi, Y. Takigawa and K. Higashi
    Philosophical Magazine, Vol. 91, pp. 4158-4171 (2011).
    https://doi.org/10.1080/14786435.2011.603370
  75. Effect of Mg content on the minimum grain size of Al–Mg alloys obtained by friction stir processing
    T. Morishige, T. Hirata, T. Uesugi, Y. Takigawa, M. Tsujikawa and K. Higashi
    Scripta Materialia, Vol. 64, pp. 355-358 (2011).
    https://doi.org/10.1016/j.scriptamat.2010.10.033
  76. Influence of Bath Composition on Tensile Ductility in Electrodeposited Bulk Nanocrystalline Nickel
    I. Matsui, Y. Takigawa, T. Uesugi and K. Higashi
    Materials Transactions, Vol. 52, pp. 142-146 (2011).
    https://doi.org/10.2320/matertrans.M2010279
  77. First-principles calculation of grain boundary energy and grain boundary excess free volume in aluminum: role of grain boundary elastic energy
    T. Uesugi and K. Higashi
    Journal of Materials Science, Vol. 46, pp. 4199-4205 (2011).
    https://doi.org/10.1007/s10853-011-5305-2
  78. Enhanced tensile ductility in bulk nanocrystalline nickel electrodeposited by sulfamate bath
    I. Matsui, Y. Takigawa, T. Uesugi, and K. Higashi
    Materials Letters, Vol. 65, pp. 2351-2353 (2011).
    https://doi.org/10.1016/j.matlet.2011.05.002
  79. Dynamic Friction Properties and Microstructural Evolution in AZ31 Magnesium Alloy at Elevated Temperature during Ring Compression Test
    N. Nishioka, L.F. Chiang, T. Uesugi, Y. Takigawa and K. Higashi
    Materials Transactions, Vol. 52, pp. 1575-1580 (2011).
    https://doi.org/10.2320/matertrans.MC201013
  80. 高温リング圧縮試験によるアルミニウム合金の動的摩擦係数の調査
    江立夫, 西岡典昭, 王建義, 細川裕之, 上杉徳照, 瀧川順庸, 東健司
    材料, Vol. 60, pp. 838-843 (2011).
    https://doi.org/10.2472/jsms.60.838
  81. 各種光沢剤を添加したスルファミン酸浴から作製したバルクナノ結晶Niの引張特性
    松井功, 岩見英明, 瀧川順庸, 上杉徳照, 東健司
    表面技術, Vol. 62, pp. 686-690 (2011).
    https://doi.org/10.4139/sfj.62.686
  82. Solute Segregation at Σ11(113)[110] Grain Boundary and Effect of the Segregation on Grain Boundary Cohesion in Aluminum from First Principles
    T. Uesugi and K. Higashi
    Materials Science Forum, Vols. 654-656, pp. 942-945 (2010).
    https://doi.org/10.4028/www.scientific.net/MSF.654-656.942
  83. Tensile Properties of Bulk Nanocrystalline Ni and Ni-W Fabricated by Sulfamate Bath
    I. Matsui, Y. Takigawa, T. Uesugi and K. Higashi
    Materials Science Forum, Vols. 654-656, pp. 1114-1117 (2010).
    https://doi.org/10.4028/www.scientific.net/MSF.654-656.1114
  84. Effect of Tool Materials on Dynamic Friction Characteristics and Microstructural Evolution at Elevated Temperature in Extruded AZ31 Magnesium Alloy
    L.F. Chiang, N. Nishioka, J.Y. Wang, H. Hosokawa, T. Uesugi, Y. Takigawa and K. Higashi
    Materials Transactions, Vol. 51, pp. 477-481 (2010).
    https://doi.org/10.2320/matertrans.MBW200914
  85. Investigation on Dynamic Friction Properties of Extruded AZ31 Magnesium Alloy Using by Ring Upsetting Method
    L. F. Chiang, H. Hosokawa, J. Y. Wang, T. Uesugi, Y. Takigawa and K. Higashi
    Materials Transactions, Vol. 51, pp. 1249-1254 (2010).
    https://doi.org/10.2320/matertrans.P-M2010811
  86. Effect of Small Addition of Zinc on Creep Behavior of Tin
    N. Hamada, M. Hamada, T. Uesugi, Y. Takigawa and K. Higashi
    Materials Transactions, Vol. 51, pp. 1747-1752 (2010).
    https://doi.org/10.2320/matertrans.MJ201023
  87. Effect of Pre-Introduced Shear Bands Direction on Deformation Behavior in Zr55Al10Ni5Cu30 Bulk Metallic Glass
    J. Kobata, T. Kimura, Y. Takigawa, T. Uesugi, H. Kimura and K. Higashi
    Materials Transactions, Vol. 50, pp. 2355-2358 (2009).
    https://doi.org/10.2320/matertrans.MAW200920
  88. Fe-13.5Cr-1.3Mo-0.4C系ステンレス鋼におけるEqual-cannel angular extrusionを用いた高硬度化プロセスについて
    今井順二、濱田糾、上杉徳照、瀧川順庸、東健司
    材料, Vol.57, pp.105-111, (2008).
    https://doi.org/10.2472/jsms.57.105
  89. 超急冷凝固されたFe-13.5Cr-1.3Mo-0.4C系ステンレス鋼における高硬度化プロセスの最適化
    今井順二、濱田糾、上杉徳照、瀧川順庸、東健司
    材料, Vol. 57, pp.704-711, (2008).
    https://doi.org/10.2472/jsms.57.704
  90. リング圧縮試験を用いたAZ31マグネシウム押出材の温間域における動的摩擦係数の調査
    江立夫、細川裕之、王建義、上杉徳照、瀧川順庸、東健司
    塑性と加工, Vol. 49, pp. 901-905, (2008).
    https://doi.org/10.9773/sosei.49.901
  91. Softening by Coarsening of Ni-Al B2 Phase Particles in Fe-Cr-Ni-Al-Zr Alloy
    J. Imai, T. Hamada, T. Uesugi, Y. Takigawa and K. Higashi
    Materials Transactions, Vol. 49, pp. 489-493 (2008).
    https://doi.org/10.2320/matertrans.MBW200730
  92. Effect of Initial Grain Size on Dynamically Recrystallized Grain Size in AZ31 Magnesium Alloy
    Y. Takigawa, M. Honda, T. Uesugi and K. Higashi
    Materials Transactions, Vol.49, pp.1979-1982 (2008).
    https://doi.org/10.2320/matertrans.MAW200829
  93. First-principles calculations of grain boundary γ-surface for various grain boundaries with different energies in aluminum
    T. Uesugi, Y. Inoue, Y. Takigawa and K. Higashi
    Materials Science Forum Vols. 551-552 pp. 331-336 (2007).
    https://doi.org/10.4028/www.scientific.net/MSF.551-552.331
  94. Atomistic Studies of Deformation Mechanism of Nanocrystalline Al-Ti and Al-Fe Alloys from First-Principles
    T. Uesugi, Y. Takigawa and K. Higashi
    Materials Science Forum, Vols. 561-565, pp. 977-980 (2007).
    https://doi.org/10.4028/www.scientific.net/MSF.561-565.977
  95. Dynamic Recrystallization during Hot Extrusion in AZ31 and AZ80 Alloys
    M. Honda, T. Uesugi, Y. Takigawa, H. Mabuchi and K. Higashi
    Advanced Materials Research, Vols. 26-28, pp. 449-452 (2007).
    https://doi.org/10.4028/www.scientific.net/AMR.26-28.449
  96. Dynamic Recrystallization during Hot Extrusion in Mg-3Al-0.1Y Alloy
    T. Noro, T. Uesugi, Y. Takigawa, M. Tsujikawa, H. Mabuchi and Higashi
    Advanced Materials Research, Vols. 26-28, pp. 433-436 (2007).
    https://doi.org/10.4028/www.scientific.net/AMR.26-28.433
  97. Stacking Fault Energy of Cu-Ga Alloys from First Principles
    S. Fujita, T. Uesugi, Y. Takigawa and K. Higashi
    Materials Science Forum, Vols. 561-565, pp. 1915-1918 (2007).
    https://doi.org/10.4028/www.scientific.net/MSF.561-565.1915
  98. Fabrication of the Bulk Amorphous Ni-W Alloy by an Electroforming Process
    S. Wakayama, Y. Kimono, Y. Takigawa, T. Uesugi and K. Higashi
    Materials Science Forum, Vols. 561-565, pp. 1375-1378 (2007).
    https://doi.org/10.4028/www.scientific.net/MSF.561-565.1375
  99. Effect of Co-doping on Phase Stability of Zirconia Bioceramics in Hot Water
    S. Yuhara, Y. Takigawa, T. Uesugi and K. Higashi
    Advanced Materials Research, Vols. 26-28, pp. 773-776 (2007).
    https://doi.org/10.4028/www.scientific.net/AMR.26-28.773
  100. Effect of Small Amount of Dopant on Phase Stability of Zirconia Bioceramics
    Y. Takigawa, T. Uesugi and K. Higashi
    Materials Science Forum, Vols. 561-565, pp. 1561-1564 (2007).
    https://doi.org/10.4028/www.scientific.net/MSF.561-565.1561
  101. First-Principles Studies on Grain Boundary Energy of [110] Tilt Grain Boundaries in Aluminum
    Y. Inoue, T. Uesugi, Y. Takigawa and K. Higashi
    Materials Science Forum, Vols. 561-565, pp. 1837-1840 (2007).
    https://doi.org/10.4028/www.scientific.net/MSF.561-565.1837
  102. Effect of Ca and Sr content on room and high temperature mechanical properties of a cast AZ91 Magnesium Alloy
    I. Takeuchi, K. Hirai, Y. Takigawa, T. Uesugi and K. Higashi
    Advanced Materials Research, Vols. 26-28, pp. 141-144 (2007).
    https://doi.org/10.4028/www.scientific.net/AMR.26-28.141
  103. Mechanical Properties of Twin Roll Cast AZ91 Magnesium Alloy at Room Temperature
    S. Uchida, I. Takeuchi, G. Gonda, K. Hirai, T. Uesugi, Y. Takigawa and K. Higashi
    Advanced Materials Research, Vols. 26-28, pp. 145-148 (2007).
    https://doi.org/10.4028/www.scientific.net/AMR.26-28.145
  104. Microstructure and Mechanical Properties in Friction Stir Processed Zr-Al-Ni-Cu Bulk Metallic Glass
    J. Kobata, Y. Takigawa, S.W. Chung, H. Tsuda, T. Uesugi, H. Kimura and K. Higashi
    Materials Science Forum, Vols. 561-565, pp. 1345-1348 (2007).
    https://doi.org/10.4028/www.scientific.net/MSF.561-565.1345
  105. Fabrication of Homogeneous Bulk Nanocrystalline Ni-W Alloys be an Electroforming Process
    A. Fujii, Y. Kimoto, S. Wakayama, Y. Takigawa, T. Uesugi and K. Higashi
    Advanced Materials Research, Vols. 26-28, pp. 691-694 (2007).
    https://doi.org/10.4028/www.scientific.net/AMR.26-28.691
  106. Effect of Second Phase Particles on Phase Stability of Zirconia in Hot Water
    T. Shibano, Y. Takigawa, T. Uesugi and K. Higashi
    Advanced Materials Research, Vols. 26-28, pp. 781-784 (2007).
    https://doi.org/10.4028/www.scientific.net/AMR.26-28.781
  107. Effect of manganese addition on strength and fracture toughness in Mg-6Al-1Zn alloy
    T. Sasaki, T. Uesugi, Y. Takigawa and K. Higashi
    Key Engineering Materials, Vols. 306-308, pp. 857-862 (2006).
    https://doi.org/10.4028/www.scientific.net/KEM.306-308.857
  108. Deformation Mechanism of Nanocrystalline Al-Fe Alloys by Analysis from Ab-Initio Calculations
    T. Uesugi, Y. Takigawa and K. Higashi
    Materials Science Forum, Vol. 503-504, pp.209-214 (2006).
    https://doi.org/10.4028/www.scientific.net/MSF.503-504.209
  109. Materials Design for High-Strength Mg-Based Alloys by Understanding from Ab Initio Calculation
    T. Uesugi and K. Higashi
    Materials Science Forum, Vol.488-489, pp.131-134 (2005).
    https://doi.org/10.4028/www.scientific.net/MSF.488-489.131
  110. Elastic constants of AlLi from first principles
    T. Uesugi, Y. Takigawa and K. Higashi
    Materials Transactions, Vol.46, pp.1117-1121 (2006).
    https://doi.org/10.4028/www.scientific.net/KEM.306-308.857
  111. Grain Boundary Sliding of Σ5(001) Twist Grain Boundary in Aluminium Bicrystal from First-Principles Calculations
    T. Uesugi, K. Tsuchiya, M. Kohyama and K. Higashi
    Materials Science Forum, Vol.447-448, pp.27-32 (2004).
    https://doi.org/10.4028/www.scientific.net/MSF.447-448.27
  112. Generalized Stacking Fault Energy and Dislocation Properties for Various Slip Systems in Magnesium: a First-Principles Study
    T. Uesugi, M. Kohyama, M. Kohzu and K. Higashi
    Materials Science Forum, Vol.419, pp.225-230 (2003).
    https://doi.org/10.4028/www.scientific.net/MSF.419-422.225
  113. Molecular Dynamics Simulation of Triazine Dithiol / MgO Interface
    N. Hamada, T. Uesugi, H. Torii and K. Higashi
    Materials Science Forum, Vol.419, pp.557-562 (2003).
    https://doi.org/10.4028/www.scientific.net/MSF.419-422.943
  114. Atomic Size Effects on Al, Ca and Sc in Mg Solid Solutions from First-Principles Calculations
    T. Uesugi, M. Kohyama, K. Higashi
    Materials Science Forum, Vol.426, pp.599-603 (2003).
    https://doi.org/10.4028/www.scientific.net/MSF.426-432.599
  115. Ab initio study on divacancy binding energies in aluminum and magnesium
    T. Uesugi, M. Kohyama and K. Higashi
    Physical Review B, Vol.68, 184103 (2003).
    https://doi.org/10.1103/PhysRevB.68.184103
  116. Ab Initio Calculation on the Structure and Elastic Properties of a Magnesium-Lithium Alloy
    T. Uesugi, M. Kohyama, M. Kohzu and K. Higashi
    Materials Transactions, Vol.42, pp.1167-1171 (2001).
    https://doi.org/10.2320/matertrans.42.1167
  117. Ab Initio Study on the Structure of Mg-Li Alloys
    T. Uesugi, M. Kohyama, M. Kohzu and K. Higashi
    Materials Science Forum, Vol.350-351, pp.49-54 (2000).
    https://doi.org/10.4028/www.scientific.net/MSF.350-351.49

 

Conference proceedings

  1. Alloying Effects of Transition Metals on Beta Phase Stability of Ti Alloys from First-Principles Calculations
    Proceedings of Ti-2015: The 13th World Conference on Titanium, pp.1919-1923 (2016).
    T. Uesugi, S. Miyamae, Y. Takigawa and K. Higashi
    https://doi.org/10.1002/9781119296126.ch321
  2. Effect of Transition Metals on Enthalpy Change in Alpha and Beta Ti Alloys from First-Principles Calculations
    Proceedings of the 9th Pacific Rim International Conference on Advanced Materials and Processing, pp. 91-92 (2016).
    T. Uesugi, S. Miyamae, Y. Takigawa and K. Higashi
  3. Effect of Period 4 Elements on Work Function in Aluminum from First-Principles Calculations
    Proceedings of the 9th Pacific Rim International Conference on Advanced Materials and Processing, pp. 621-623 (2016).
    T. Higuchi, T. Uesugi, H. Inoue, Y. Takigawa and K. Higashi
  4. Effects of Third Elements on Shape Memory Properties of Ti-Nb-X Ternary Alloys from First-Principles Calculations
    Proceedings of the 9th Pacific Rim International Conference on Advanced Materials and Processing, pp. 878-881 (2016).
    D. Minami, T. Uesugi, Y. Takigawa and K. Higashi
  5. Grain Boundary Energy of Σ13 [0001] Twist Grain Boundary in MgB2 from First-Principles Calculations
    Proceedings of the 9th Pacific Rim International Conference on Advanced Materials and Processing, pp. 914-916 (2016).
    Y. Hisai, T. Uesugi, Y. Takigawa and K. Higashi
  6. Design of high-strength aluminum alloys based on first-principles calculations of misfit strain and grain boundary cohesion
    Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XXIV, pp. 552-563 (2015).
    T. Uesugi and K. Higashi
  7. Effect of transition elements on specific electrical resistance in Aluminum from first-principles calculations
    Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XXIV, pp. 561-567 (2015).
    T. Higuchi, T. Uesugi, Y. Takigawa and K. Higashi
  8. Effects of transition metals on elastic moduli of binary β-Ti alloys from first-principles calculations
    Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XXIV, 568-576 (2015).
    A. Koyano, T. Uesugi, Y. Takigawa and K. Higashi
  9. Effects of third elements on shape memory properties of Ti-Nb-X and Ti-Mo-X ternary alloys from first-principles calculations.
    Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XXIV, pp. 577-581 (2015).
    D. Minami, T. Uesugi, Y. Takigawa and K. Higashi
  10. Study of solute atoms and precipitates affecting recrystallization temperature in high purity Al-Fe alloy
    Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XXIV, pp. 686-692 (2015).
    K. Wada, K. Takeshima, T. Uesugi, Y. Takigawa and K. Higashi
  11. Reduction of embrittlement elements in electrodeposited Al by alloying
    Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XXIV, pp. 745-748 (2015).
    C. Kuma, Y. Hanaoka, Y. Takigawa, T. Uesugi and K. Higashi
  12. Fabrication of new Ti-Zr-Cu-Ga bulk metallic glasses
    Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XXIV, pp. 749-752 (2015).
    Y. Ohashi, N. Shirasawa, Y. Takigawa, T. Uesugi and K. Higashi
  13. Elevating W content of high ductility electrodeposited bulk nanocrystalline Ni–W alloys
    Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XXIV, pp. 753-756 (2015).
    H. Kodama, H. Mori, Y. Takigawa, T. Uesugi and K. Higashi
  14. Improvement in plastic elongation at room temperature of electrodeposited bulk nanocrystalline Fe–Ni alloys by reducing sulfur content
    Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XXIV, pp. 757-762 (2015).
    H. Mori, I. Matsui, Y. Takigawa, T. Uesugi and K. Higashi
  15. Modeling Solid Solution Strengthening Using First-Principles Results of Misfit Strain with Friedel Model in Al-Based Alloys
    Proceeding of the 12th International Conference on Aluminium Alloys (ICAA), pp. 1421-1425 (2010).
    T. Uesugi and K. Higashi
  16. Creep Resistant Mg-Al-Zn-Ca-Sr alloy
    Magnesium Technology 2009 : Proceedings of a Symposium Sponsored by the Magnesium Committee of the Light Metals Division of the Minerals, Metals & Materials Society , pp. 143-144 (2009).
    K. Hirai, T. Uesugi, Y. Takigawa and K. Higashi
  17. Application of Misfit Strain Calculated from First principles in Solid Solution Strengthening of Al-based Alloys
    Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XVIII, pp. 183-192 (2009).
    T. Uesugi and K. Higashi
  18. Threshold Stress for Superplastic Flow in Fine-Grained Dilute Magnesium Alloys
    Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XVIII, pp. 461-466 (2009).
    A. Owashi, H. Watanabe, T. Uesugi, Y. Takigawa and K. Higashi
  19. Friction Coefficient and its Effect on Texture of Extruded AZ31 Magnesium Alloy in Ring Compression Test
    Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XVIII, pp. 467-472 (2009).
    N. Nishioka, L. F. Chiang, T. Uesugi, Y. Takigawa, and K. Higashi
  20. Effects of Heavy Metal Additions on Deformation Characteristics at Elevated Temperatures in Magnesium
    Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XVIII, pp. 483-486 (2009).
    K. Sumimoto, T. Uesugi, Y. Takigawa and K. Higashi
  21. First-principles Studies on Magnesium Σ10 Grain Boundary: Effects of Al and Y Solute Atoms
    Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XVIII, pp. 2067-2074 (2009).
    R. Nishihara, T. Uesugi, Y. Takigawa, and K. Higashi
  22. Mechanical Properties in Aluminum Lanthanum Alloys Produced by Electron-Beam Deposition
    Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XVIII, pp. 251-256 (2009).
    W. Kinoshita, Y. Takigawa, T. Uesugi and K. Higashi
  23. Plastic Deformation Behavior of Zr-based Bulk Metallic Glass with Different Pre-introduced Shear Bands Direction
    Proceedings of a Processing and Fabrication of Advanced Materials (PFAM) XVIII, pp. 1805-1812 (2009).
    T. Kimura, J. Kobata, Y. Takigawa, T. Uesugi, H. Kimura and K. Higashi
  24. Glass Transition and Crystallization Behavior of Zr-Based Metallic Glass under Rapid Heating
    Proceedings of a Processing and Fabrication of Advanced Materials (PFAM) XVIII, pp. 1813-1818 (2009).
    Y. Sakamoto, Y. Saotome, K. Amiya, Y. Takigawa, T. Uesugi, and K. Higashi
  25. Influence of bath Composition on Characteristics in an Electrodeposited Bulk Nanocrystalline Ni
    Proceedings of a Processing and Fabrication of Advanced Materials (PFAM) XVIII, pp. 933-936 (2009).
    I. Matsui, Y. Takigawa, T. Uesugi, and K. Higashi
  26. Toward understanding in atomistic scale of grain boundary plasticity
    Proceedings of the 3rd JSME/ASME International Conference on Material and Processing, ICM&P 2008, 72403, (2008).
    T. Uesugi and K. Higashi
  27. Deformation Behavior of Zr-based Bulk Metallic Glass Matrix Composites in Compression
    Progress of Composites 2008 in Asia and Australasia (Proceedings of ACCM-6), pp. 213-214, (2008).
    J. Kobata, Y. Takigawa, T. Mukai, T. Uesugi, H. Tsuda, H. Kimura and K. Higashi
  28. Ab Initio Study on Generalized Stacking Fault Energy of Basal Plane in Magnesium
    Proceedings of the Second International Conference on Light Materils for Transportation Systems, pp. 255-259 (2001).
    T. Uesugi, M. Kohyama, M. Kohzu and K. Higashi
  29. Ab initio study of generalized stacking fault energies in magnesium
    Proceedings of the 10th International Conference on Fracture, Advances in Fracture Research, CDROM (2001).
    T. Uesugi, M Kohyama, M Kohzu, K Higashi

 

Book and Review articles

  1. 機械学習技術の紹介とその鉄鋼業への応用事例
    上杉徳照
    山陽特殊製鋼技報, Vol. 30, pp. 3-20 (2023).
    https://www.sanyo-steel.co.jp/technology/images/pdf/30/30_03.pdf
  2. 機械学習の概要と材料工学への応用例(前編)
    上杉徳照
    軽金属, Vol. 73, pp. 104-111 (2023).
    https://doi.org/10.2464/jilm.73.104
  3. チタンの基礎と応用
    上杉徳照, 佐原亮二 (分担執筆)
    第3章 合金設計法と計算科学, 内田老鶴圃, 75-94 (2023).
  4. Ti-V合金の変態温度に及ぼす酸素の影響の第一原理計算
    上杉徳照
    チタン, Vol. 68, pp. 304-309 (2020).
    https://ci.nii.ac.jp/naid/40022392456/
  5. チタン合金の変態温度に及ぼす酸素の影響の第一原理計算
    上杉徳照
    チタンの準安定相・析出相研究部会報告書, 軽金属学会, pp. 55-65 (2020).
  6. 鉄鋼材料における侵入型溶質原子―置換型溶質原子のナノクラスタリング―
    宮本吾郎, 沼倉宏, 榎木勝徳, 上杉徳照, 大谷博司, 古原忠
    まてりあ, Vol. 59, 128-33 (2020).
    https://doi.org/10.2320/materia.59.128
  7. チタンの計算材料科学
    上杉徳照, 佐原亮二,
    軽金属, Vol. 67, pp.653-661 (2017).
    https://cir.nii.ac.jp/crid/1010000782280615068
  8. 自動車軽量化のための材料開発と強度、剛性、強靭性の向上技術
    東健司, 瀧川順庸, 上杉徳照 (分担執筆)
    第5章 第4節 マグネシウム合金の組織制御と高延性化技術, 技術情報協会, 445-450 (2015).
  9. ミニ特集「材料科学における第一原理計算の進展」企画にあたって
    上杉徳照
    まてりあ, Vol. 53, pp. 393 (2014).
    https://doi.org/10.2320/materia.53.393
  10. 第一原理計算の固溶体合金への展開
    上杉徳照, 東健司
    まてりあ, Vol. 53, pp. 410-413 (2014).
    https://doi.org/10.2320/materia.53.410
  11. 第一原理計算概論と化合物・希薄合金への摘用
    上杉徳照,東健司
    金属, Vol. 80, pp. 4-10 (2010)
    https://iss.ndl.go.jp/books/R100000002-I000000005791-00
  12. 第一原理計算による固溶強化型アルミニウム合金の合金設計
    上杉徳照、東健司
    軽金属学会研究部会報告書, Vol. 46, pp. 57-64 (2005).
  13. 第一原理シミュレーションによる添加元素の最適化設計
    上杉徳照, 東健司
    軽金属, Vol. 54, pp. 82-89 (2004).
    https://doi.org/10.2464/jilm.54.82

 

Patent

  1. 特許第7456592号 黒鉛球状化処理装置、学習装置、および、マグネシウム投入量の決定方法

    上杉 徳照, 小川 耕平
    https://jglobal.jst.go.jp/detail?JGLOBAL_ID=202403003503936765
  2. 特開2023-043863 定量評価装置、定量評価プログラム、および学習モデル生成プログラム
    小川 耕平, 堤 親平, 上杉 徳照, 中島 智晴
    https://jglobal.jst.go.jp/detail?JGLOBAL_ID=202303017554482851
  3. 特許第7080174号 アルミニウム合金線、架空送電線、及びアルミニウム合金線の製造方法
    岡本 紳哉, 岩山 功, 桑原 鉄也, 北村 真一, 赤祖父 保広, 東 健司, 瀧川 順庸, 上杉 徳照, 長野 宏治, 渡部 雅人
    https://jglobal.jst.go.jp/detail?JGLOBAL_ID=202203008519924748
  4. 特開2021-155772 黒鉛球状化処理装置、学習装置、および、マグネシウム投入量の決定方法
    上杉 徳照, 小川 耕平
    https://jglobal.jst.go.jp/detail?JGLOBAL_ID=202103007699368747
  5. WO2018-062322 アルミニウム合金線、架空送電線、及びアルミニウム合金線の製造方法 
    岡本 紳哉, 岩山 功, 桑原 鉄也, 北村 真一, 赤祖父 保広, 東 健司, 瀧川 順庸, 上杉 徳照, 長野 宏治, 渡部 雅人
    https://jglobal.jst.go.jp/detail?JGLOBAL_ID=201903010426792980
  6. 特開2017-217693 鉛フリーはんだ合金
    濱田 真行, 東 健司, 瀧川 順庸, 上杉 徳照, 森 雄基
    https://jglobal.jst.go.jp/detail?JGLOBAL_ID=201703006163847260
  7. 特許第6161589号 溶加材、マグネシウム(Mg)合金材料と溶加材との接合構造、マグネシウム(Mg)合金材料の溶融溶接による接合方法、マグネシウム(Mg)合金材料接合構造体、及びマグネシウム(Mg)合金材料接合構造体の製造方法
    上田 光二, 木ノ本 裕, 瀧川 順庸, 東 健司, 上杉 徳照
    https://jglobal.jst.go.jp/detail?JGLOBAL_ID=201703020543088330
  8. WO2017-022597 アルミニウム系合金の溶射材料および溶射皮膜
    東 健司, 井上 博之, 上杉 徳照
    https://jglobal.jst.go.jp/detail?JGLOBAL_ID=201803004260920635
  9. 特開2017-013070 溶加材、マグネシウム(Mg)合金材料と溶加材との接合構造、マグネシウム(Mg)合金材料の溶融溶接による接合方法、マグネシウム(Mg)合金材料接合構造体、及びマグネシウム(Mg)合金材料接合構造体の製造方法 
    上田 光二, 木ノ本 裕, 瀧川 順庸, 東 健司, 上杉 徳照
    https://jglobal.jst.go.jp/detail?JGLOBAL_ID=201703018616383757
  10. 特許第6010454号 アルミニウム合金線
    丹治 亮, 西川 太一郎, 中井 由弘, 東 健司, 瀧川 順庸, 上杉 徳照
    https://jglobal.jst.go.jp/detail?JGLOBAL_ID=201603001661723006
  11. 特開2016-108654 マグネシウム合金押出し材およびその製造方法
    平井 勤二, 東 健司, 瀧川 順庸, 上杉 徳照
    https://jglobal.jst.go.jp/detail?JGLOBAL_ID=201603000962638660
  12. 特許第5729081号 マグネシウム合金
    平井 勤二, 東 健司, 瀧川 順庸, 上杉 徳照
    https://jglobal.jst.go.jp/detail?JGLOBAL_ID=201503019479583256
  13. 特開2014-125665 アルミニウム合金、及びアルミニウム合金線 
    丹治 亮, 西川 太一郎, 中井 由弘, 東 健司, 瀧川 順庸, 上杉 徳照
  14. 特開2012-207253 マグネシウム合金 
    平井 勤二, 東 健司, 瀧川 順庸, 上杉 徳照
    https://jglobal.jst.go.jp/detail?JGLOBAL_ID=201203084591330446
  15. 特許第5074773号 銅合金およびその製造方法ならびに銅合金を用いた電線・ケーブル
    丹治 亮, 桑原 鉄也, 西川 太一郎, 中井 由弘, 東 健司, 瀧川 順庸, 上杉 徳照
    https://jglobal.jst.go.jp/detail?JGLOBAL_ID=201303036862368978
  16. 特開2012-082469 アルミニウム合金
    丹治 亮, 中井 由弘, 西川 太一郎, 東 健司, 瀧川 順庸, 上杉 徳照
    https://jglobal.jst.go.jp/detail?JGLOBAL_ID=201203069321895620
  17. WO2009-051240 鉛フリーはんだ
    濱田 真行, 高木 督, 東 健司, 瀧川 順庸, 上杉 徳照
    https://jglobal.jst.go.jp/detail?JGLOBAL_ID=201103070317616823
  18. 特開2008-169422 銅合金およびその製造方法ならびに銅合金を用いた電線・ケーブル 
    丹治 亮, 桑原 鉄也, 西川 太一郎, 中井 由弘, 東 健司, 瀧川 順庸, 上杉 徳照
    https://jglobal.jst.go.jp/detail?JGLOBAL_ID=200903017691262818